• Follow us
Stud Type Track Roller Bearing with Axial Guidance (KR40PP)
May 20, 2016

Basic Info

  • Model NO.: KR40PP

  • Trademark: CNJDB

  • Origin: Changzhou Jiangsu

  • Seal: Gap Seals

  • Specification: SGS ISO9001

  • HS Code: 84825000

Product Description





Stud type track rollers :  are complete units consisting of a machined stud,thrust washers,an outer ring
                                           and a needle roller and cage assembly or a full complement needle or cylindrical
                                           roller set.
                                           have a thick-walled outer ring with a crowned outside surface
                                           can support high radial forces
                                           are greased with lithium complex soap grease to DIN 51825-KP2N-25
                                           can be relubricated through the stud
                                            are protected against contaminants and water spray by -lip seals
                                                                                                                                                -gap seals
                                                                                                                                                -labyrinth seals
                                           are easy to fit due to- a thread on the end of the stud
                                                                                  - a slot or hexagonal socket in the ribbed end of the stud

Outside
diameter
DesignationMassWith eccentric collar
designation
MassDimensionsNut tightening
torgue
Nm
Basic load ratingFatigue
limit
load

KN
Speed

min
DdCr
min
BB1B2GG1MM1C1d2Eccectric collar
d1
h9
B3edyn.
Cw
KN
stat
Cow
KN
40KR40PP247

40182015836.5 8M18x1.5196 30.83222161 8710.915.51.832900